How to reset your Floodcheck® Auto
If you do not have any water, or have lost your water supply, then you need to RESET your Floodcheck® Auto. There is usually a reason why the water has stopped. See the Auto Warnings page for more information on this.
The Floodcheck® Auto Valve only.
This applies if you have the “Auto Valve” only and do not have the optional Water Control Switch.
Locate the “Auto Valve” which can usually be found near the main water stopcock. (Main shut off valve.)
Find the “Small plastic Trim Tool” supplied with your “Auto Valve” and gently push it into the hole marked “Push to Reset”. Wait for 20 seconds and then the water supply should be working as normal.
The Water Control Switch
If you have a “Water Control Switch” then press the top green button marked “Reset”. Wait for 20 seconds and then the water supply should be restored as normal.